Regulatory Information
Xerox
®
AltaLink
®
C80XX Series Multifunction Printer 339
User Guide
To save power, you can enable Auto Power Off mode on your device. If Auto Power Off mode is enabled,
you can configure the mode as follows:
• Always Allowed: The device powers off automatically after the specified time, and the cumulative
L
ow Power mode and Sleep mode timeouts have elapsed.
• Allowed ONLY When Conditions are Met: The device automatically powers off only after timeouts
have elapsed. The device also powers off if Fax, USB Drive, and Wired and Non-Wired Network have
n
ot been activated.
To change the Power Saver settings, refer to the User Guide at www.xerox.com/office/ALC80XXdocs.
For further assistance, contact your System Administrator or refer to the System Administrator Guide.
To enable Auto Power Off mode, contact your System Administrator. For details, refer to the System
Administrator Guide at www.xerox.com/office/ALC80XXdocs.
To learn more about Xerox participation in sustainability initiatives, go to: www.xerox.com/about-
xerox/environment/enus.html.
Note: Changing the default Power Saver activation times can result in an overall higher energy
consumption of the device. Before you turn off Power Saver modes or set a long activation time,
consider the increase in device power consumption.
Default Power Saver Settings
This device is ENERGY STAR
®
-qualified under the ENERGY STAR Program Requirements for Imaging
Equipment. The transition time from Ready mode to Low Power mode can be set up to 30 minutes.
The default value is 2 minutes. The transition time from Low Power mode to Sleep mode can be set up to
30 minutes. The default value is 0 minutes. The total transition time from Ready mode to Sleep mode
can take up to 60 minutes.
To change the Power Saver settings, refer to the User Guide at www.xerox.com/office/ALC80XXdocs.
For further assistance, contact your System Administrator, or refer to the System Administrator Guide.
Environmental Choice Certified to Office Machines CCD-035
This product is certified to Environmental Choice standard for office machines,
meeting all requirements for reduced environmental impact. As part of
achieving certification, Xerox Corporation has proven this product meets the
Environmental Choice criteria for energy efficiency. Certified copier, printer,
multifunctional device, and fax products must also meet criteria such as
reduced chemical emissions and demonstrate compatibility with recycled
supplies. Environmental Choice was established in 1988 to help consumers
find products and services with reduced environmental impacts. Environmental
Choice is a voluntary, multi-attribute, and lifecycle-based environmental
certification. This certification indicates that a product has undergone rigorous
scientific testing, exhaustive auditing, or both, to prove its compliance with
stringent, third-party, environmental performance standards.
To Next Page
Loading...
Need help?
General
