Xerox AltaLink C80 Series - Page 73

Xerox
®
Apps
Xerox
®
AltaLink
®
C80XX Series Multifunction Printer 73
User Guide
To pause or delete a print job:
1. At the printer control panel, press the Home button.
2. To pause a job that is printing, touch the pause button on the control panel.
3. Select a task.
− To resume the print job, touch Resume.
− To delete the print job, touch Delete. At the prompt, touch Delete.
4. To return to the Home screen, press the Home button.
To pause, promote, or delete a job waiting to print:
1. At the printer control panel, press the Home button.
2. Touch Jobs, then touch the name of the desired print job.
3. Select a task.
Note: If you do not make a selection, the job automatically resumes after the set timeout period.
− To pause the print job, touch Hold. To resume the print job, touch Release.
− To delete the print job, touch Delete. At the prompt, touch Delete.
− To move the job to the top of the list, touch Promote.
− To view the status of the job, touch Job Progress.
− To view information about the job, touch Job Details, then touch Job Settings or Required
Resources.
4. To return to the Home screen, press the Home button.
Notes:
• The system administrator can restrict users from deleting jobs. If a system administrator has
restricted job deletion, you can view the jobs, but cannot delete them.
• Only the user that sent the job, or the system administrator, can delete a Secure Print job.
To print a job held for resources:
1. At the printer control panel, press the Home button.
2. Touch Jobs.
3. From the jobs list, touch the held job name. The resources required for the job appear on the control
panel.
4. Do one of the following steps.
− To print the job, replenish the resources required. The job resumes automatically when the
required resources are available. If the job does not print automatically, touch Resume.
− To choose an alternative paper source to enable the job to print, touch Print On Alternate
Paper. Select a paper tray, then touch OK.
− To delete the print job, touch Delete. At the prompt, touch Delete.
Note: The Print On Alternate Paper option is enabled using the Embedded Web Server. For details
about the Print On Alternate Paper option, refer to the System Administrator Guide at
www.xerox.com/office/ALC80XXdocs
.
5. To return to the Home screen, press the Home button.