Xerox WorkCentre 5021 Service Documentation

08/2012
6-12
WorkCentre 5021/5019
6.1.11, 6.1.12
Initial Issue
General Procedures
6.1.11.2 Audible Noise
Audible noise level of the product shall be the following values or below (when 60Hz M/C is
available, it shall be used for the assessment.):Noise shall be measured according to C11-707.
• *1: Base Configuration: Platen Cover + IIT + IOT
• *2: Full System Configuaration: DADF + IIT + IOT + Duplex + STM
• *3: LwAd: Sound power level at a source. = measured value LwA (1 M/C) + 0.3B
• *4: LpAm: Sound pressure level at a bystander position
6.1.12 Installation Environment
This machine can be operated under the following conditions:
• Temperature: 10 degrees C to 32 degrees C
• Humidity: 15 to 85% (with no condensation)
• Altitute: 0 to 8,200 feet (0 to 2,500 meters)
Table 4
Item
18 CPM 20 CPM
Base
Config *1
Full
System *2
Base
Config *1
Full
System *2
Declared A-weighted sound power level
at standby *3 (unit: B)
4.30 4.30 4.30 4.30
Delcared A-weighted sound power level
at running *3 (unit: B)
6.53 7.10 6.60 7.17
Sound pressure level at running *4 (unit:
dB) (reference only)
49 52 49 52

Xerox WorkCentre 5021 Specifications

General

Print Technology	Laser
Print Speed	Up to 20 ppm
Copy Speed	Up to 20 cpm
Copy Resolution	Up to 600 x 600 dpi
Scan Resolution	Up to 600 x 600 dpi
Paper Capacity	250 sheets
Monthly Duty Cycle	Up to 20, 000 pages
Connectivity	USB 2.0
Functions	Print, Copy, Scan
Maximum Paper Size	A3
Duplex Printing	Manual
Memory	128 MB
Fax Transmission Speed	33.6 Kbps (optional)
Operating System Compatibility	Windows, Mac
Print Resolution	600 x 600 dpi