Xerox WorkCentre 5022 User Manual

Scan
Xerox
®
WorkCentre
®
5022/5024 Multifunction Printer
User Guide
7-6
Using an Application to Load Scan Data from
the Machine via USB
This function allows you to load scan data from a TWAIN-compatible or Windows Imaging Acquisition
(WIA)-compatible application installed on a computer. On the computer display, you can set the
scanning condition and view the scanning process on the preview screen while scanning the document.
Notes
• Install the scan driver to use this function. For information on how to install the scan driver, refer
to Installing the Scan Driver on page 2-37.
• The items you can set will vary according to the TWAIN-compatible and Windows Imaging
Acquisition (WIA)-compatible applications you are using.
• The supported applications are 32-bit only.
Follow the steps below to perform the operation.
1. Place the document.
Refer to Placing the Document on page 7-1.
2. Start an application to load the scanned data.
3. Select the menu item for selecting a scanner (source).
4. Select WorkCentre 5022/5024.
5. Make advanced settings as needed.
Note For information on the scan functions, click Help in the screen to display the help information.
6. Click Scan.

Xerox WorkCentre 5022 Specifications

General

Copy Resolution	Up to 600 x 600 dpi
Scan Resolution	Up to 600 x 600 dpi
Connectivity	USB 2.0
Functions	Print, Copy, Scan
Duplex Printing	Manual
Paper Sizes	A3, A4, A5, B4, B5
Memory (Standard)	128 MB
Print Technology	Laser
Print Speed	Up to 22 ppm
Print Resolution	600 x 600 dpi
Copy Speed	Up to 22 cpm
Operating System Compatibility	Windows, Mac
First Page Out Time (Copy)	8 seconds