Xerox WorkCentre 5022 User Manual

Maintenance
Xerox
®
WorkCentre
®
5022/5024 Multifunction Printer
User Guide
12-12
Cleaning the Machine
This section describes how to clean the machine outer casing, document cover, document feeder, and
document glass.
WARNING: When cleaning this product, use the designated cleaning materials exclusive to it.
Other cleaning materials may result in poor performance of the machine. To avoid fire and
explosion never use aerosol cleaners.
WARNING: When cleaning this product, always switch off the power and unplug it. Access to a
live machine interior may cause electric shock.
Cleaning the Exterior
CAUTIONS:
• Do not use benzene, paint thinner, or other volatile liquids or spray insect repellent on the machine
as they might discolor, deform, or crack the covers.
• Cleaning the machine with an excessive amount of water may cause the machine to malfunction
or damage documents during copying.
1. Wipe the exterior with a firmly wrung soft cloth moistened with water.
Notes
• Do not use cleaning agents other than water or neutral detergent.
• If you cannot remove the dirt easily, gently wipe the machine with a soft cloth moistened with a
small amount of neutral detergent.
2. Wipe off any excess water with a soft cloth.
Cleaning the Document Cover and the Document Glass
If the document cover and document glass become soiled, smudges may appear on copies, or scanned
documents and the machine may not properly detect document sizes.

Xerox WorkCentre 5022 Specifications

General

Copy Resolution	Up to 600 x 600 dpi
Scan Resolution	Up to 600 x 600 dpi
Connectivity	USB 2.0
Functions	Print, Copy, Scan
Duplex Printing	Manual
Paper Sizes	A3, A4, A5, B4, B5
Memory (Standard)	128 MB
Print Technology	Laser
Print Speed	Up to 22 ppm
Print Resolution	600 x 600 dpi
Copy Speed	Up to 22 cpm
Operating System Compatibility	Windows, Mac
First Page Out Time (Copy)	8 seconds