Xerox WorkCentre 5022 User Manual

Too ls
Xerox
®
WorkCentre
®
5022/5024 Multifunction Printer
User Guide
9-29
IP Filter
Sets whether to restrict the IP addresses that can access the machine.
Notes
• The IP filter is a function used to suppress printing using TCP/IP.
• This setting is activated after restarting the machine.
IPv4
Sets whether to restrict the IPv4 addresses that can access the machine. When this setting is enabled,
you can register up to 10 IP addresses/subnet masks to support.
IPv6
Sets whether to restrict the IPv6 addresses that can access the machine. When this setting is enabled,
you can register up to 10 IP addresses/subnet masks to support.
Prefix Use the numeric keypad to set the prefix length of the IP address (between 1 to 128).
Gateway Address Use the numeric keypad to enter the gateway address.

Xerox WorkCentre 5022 Specifications

General

Copy Resolution	Up to 600 x 600 dpi
Scan Resolution	Up to 600 x 600 dpi
Connectivity	USB 2.0
Functions	Print, Copy, Scan
Duplex Printing	Manual
Paper Sizes	A3, A4, A5, B4, B5
Memory (Standard)	128 MB
Print Technology	Laser
Print Speed	Up to 22 ppm
Print Resolution	600 x 600 dpi
Copy Speed	Up to 22 cpm
Operating System Compatibility	Windows, Mac
First Page Out Time (Copy)	8 seconds