Too ls
Xerox
®
WorkCentre
®
5022/5024 Multifunction Printer
User Guide
9-39
Unknown is set at the time of factory shipment.
Notes
• If you change the Region setting after you have started using the machine, all the settings
including those in Phone Book and reserved fax or other jobs will be reset. Change the Region
setting with care.
•When Unknown is set, it is the only setting displayed under Fax Settings. In addition, Fax in
Default Settings is not displayed.
Follow the steps below to make the settings.
1. In the Fax Settings screen, select Region.
For information on how to display the Fax Settings screen, refer to System Settings Procedure on
page 9-1.
2. Press the OK button.
3. Select your region, and then press the OK button.
4. Select Yes (Restart Required), and then press the OK button.
Restart the machine (turn the power off and then turn it back on again).
Activity Report
Sets whether the machine automatically prints transmission results (Activity Reports) after sending
and receiving faxes.
Enable Auto Print is set at the time of factory shipment.
Off Hook Level
...
10 volts
Fax Settings
Immediate Fax
...
20%
Region
...
Unknown
Yes (Restart Required)
Apply Settings [Are You Sure?]
No
To Next Page
Loading...
Need help?
General
