Too ls
Xerox
®
WorkCentre
®
5022/5024 Multifunction Printer
User Guide
9-16
Tray Settings
The Tray Settings set the paper type (paper quality) for each paper tray. The Tray Settings is also used
to set the paper size for Paper Tray 5 (bypass).
To maintain the same print quality after changing the quality of paper in a tray, change the tray's
default paper quality setting to match the new paper.
Tray 2 to Tray 4 are displayed when the optional paper trays are mounted.
For information on how to display the Tray Settings screen, refer to System Settings Procedure on
page 9-1.
Tray 1
Paper Type
Sets the type (quality) of the paper in Tray 1.
You can select Plain 1, Plain 2, or Lightweight.
Plain 1 is set at the time of factory shipment.
Tray 2 to Tray 4
Paper Type
Sets the type (quality) of the paper in Tray 2 to Tray 4 (optional trays).
You can select Plain 1, Plain 2, Heavyweight, Extra-HW, or Lightweight.
Tray 5
Paper Size
Sets the size of the paper in Tray 5 (bypass).
You can select A3 (297 x 420mm), A4 (297 x 210mm), A4 (210 x 297mm), B4 (257 x
364mm), B5 (257 x 182mm), B5 (182 x 257mm), 8K (270 x 390mm), 16K (270x 195mm),
16K (195 x 270mm), A5 (148 x 210mm), 11 x 17" , 8.5 x 14" , 8.5 x 13" , 8.5 x 11" , 8.5 x
11" , Custom 1 - Custom 5, or Custom Size.
If you select Custom Size and press the OK button, you can set a non-standard paper size (X
(horizontal) 98 to 432 mm, Y (vertical) 127 to 297 mm).
A4 (297 x 210mm) is set at the time of factory shipment.
To Next Page
Loading...
Need help?
General
