Too ls
Xerox
®
WorkCentre
®
5022/5024 Multifunction Printer
User Guide
9-49
Single
Users must enter a single specified passcode to use the Copy feature. Use the system administrator's
passcode.
For information on how to set a passcode, refer to System Administrator Passcode on page 9-51.
Multiple
Select this setting when managing the amount of copy paper used by user or group using Accounting.
You can set passcodes and maximum number of impressions permitted for copying for each user or
group.
For more information on setting procedure, refer to User Management on page 9-52.
Paper Size Settings
Used to specify the size of paper to be automatically detected when you use standard sizes of a
document or the machine is set to detect sizes of a document.
You can select from A/B Series (8K/16K), Inch Series, A/B Series (8 x 13"), or A/B Series (8 x 13"/8 x
14").
A/B Series (8K/16K) is set at the time of factory shipment.
Show Toner Alert
Used to set how frequently to display messages on screen when it is close to the time to replace the
toner cartridge.
You can select from Off, At Startup, or At Auto Clear.
At Startup is set at the time of factory shipment.
Show Drum Alert
Used to set how frequently to display messages on the screen when it is close to the time to replace the
drum cartridge.
You can select from Off, At Startup, or At Auto Clear.
At Startup is set at the time of factory shipment.
Show Drum Warning
Used to set how frequently to display messages on the screen when the drum cartridge life is ended.
You can select from Off, At Startup, or At Auto Clear.
At Auto Clear is set at the time of factory shipment.
To Next Page
Loading...
Need help?
General
