Xerox WorkCentre 5022 User Manual

Too ls
Xerox
®
WorkCentre
®
5022/5024 Multifunction Printer
User Guide
9-51
Security Settings
System Administrator Passcode
Used to set the passcode for entering System Administration mode.
You can enter between 4 to 6 numbers from 0 to 9.
1111 (four "1" digits) is set at the time of factory shipment.
Follow the steps below to make the settings.
1. In the Tools screen, select Security Settings, and then press the OK button.
For information on how to display the Tools screen, refer to System Settings Procedure on page 9-
1.
2. Select System Admin. Passcode, and then press the OK button.
3. Enter the desired passcode in the New Passcode field.
Note The entered passcode is displayed as asterisks (*).
4. Press the OK button.
System Settings ...
Security Settings ...
Tools
Fax Settings
...
Security Settings
System Admin. Passcode
...
System Admin. Passcode
New Passcode
[* * * * * ]

Xerox WorkCentre 5022 Specifications

General

Copy Resolution	Up to 600 x 600 dpi
Scan Resolution	Up to 600 x 600 dpi
Connectivity	USB 2.0
Functions	Print, Copy, Scan
Duplex Printing	Manual
Paper Sizes	A3, A4, A5, B4, B5
Memory (Standard)	128 MB
Print Technology	Laser
Print Speed	Up to 22 ppm
Print Resolution	600 x 600 dpi
Copy Speed	Up to 22 cpm
Operating System Compatibility	Windows, Mac
First Page Out Time (Copy)	8 seconds