Xerox WorkCentre 5022 User Manual

Too ls
Xerox
®
WorkCentre
®
5022/5024 Multifunction Printer
User Guide
9-48
You can select Soft, Normal, or Loud. Select Off to disable this tone.
Off is set at the time of factory shipment.
Base Tone
Sets the standard volume of buttons that toggle settings (buttons that can be pressed repeatedly to
switch a setting among different values).
You can select Soft, Normal, or Loud. Select Off to disable this tone.
Off is set at the time of factory shipment.
Job History Verbose
Sets the machine to record Copy and USB Scan jobs on the Job History Reports.
You can select On or Off.
Off is set at the time of factory shipment.
Auto Paper Selection
Sets the target trays for the automatic tray selection.
Note Tray 1 is included in the automatic tray selection.
Tray 2 to 4
Sets each tray to be included in the automatic tray selection.
You can select On or Off.
On is set at the time of factory shipment.
Note Tray 2 to Tray 4 are displayed when the optional paper trays are mounted.
User Control
Used to restrict the users permitted to use the Copy feature.
When this setting is enabled, users must enter a passcode to use the Copy feature.
Off is set at the time of factory shipment.
Off
Users are permitted to use the Copy feature without entering a passcode.

Xerox WorkCentre 5022 Specifications

General

Copy Resolution	Up to 600 x 600 dpi
Scan Resolution	Up to 600 x 600 dpi
Connectivity	USB 2.0
Functions	Print, Copy, Scan
Duplex Printing	Manual
Paper Sizes	A3, A4, A5, B4, B5
Memory (Standard)	128 MB
Print Technology	Laser
Print Speed	Up to 22 ppm
Print Resolution	600 x 600 dpi
Copy Speed	Up to 22 cpm
Operating System Compatibility	Windows, Mac
First Page Out Time (Copy)	8 seconds