Xerox WorkCentre 5022 User Manual

Environment Settings
Xerox
®
WorkCentre
®
5022/5024 Multifunction Printer
User Guide
2-29
•Password
You can enter the password for authentication (between 1 and 64 ASCII code characters). This
can be left blank if SMTP authentication is skipped.
•Retype Password
You can verify the authentication password you entered by re-entering it here.
Apply button
You can apply changes by pressing this button.
HTTP (Connectivity > Protocols)
You can set the HTTP protocol.
Configuration
•Connection
Enabled is displayed.
•Physical Connection
Ethernet is displayed.
• Keep Alive Timeout
The keep-alive timeout period is displayed.
•Port Number
You can set the port No. used for HTTP communication (a value between 1 and 65535). You must
set a unique number for each port. (Default: 80)
• Connection Time-Out
Set the connection timeout period from 1 through 255 seconds. (Default: 30)
•Title
You can select the display for the title displayed on a browser from None Internet Services or
Printer model - IP Address.
Apply button
You can apply changes by pressing this button.
Note Reboot the machine to enable new settings.
Defaults (Services > E-mail)
General
• Subject (Default: Scan Data from "model name")
You can enter the E-mail header (up to 128 ASCII code characters).

Xerox WorkCentre 5022 Specifications

General

Copy Resolution	Up to 600 x 600 dpi
Scan Resolution	Up to 600 x 600 dpi
Connectivity	USB 2.0
Functions	Print, Copy, Scan
Duplex Printing	Manual
Paper Sizes	A3, A4, A5, B4, B5
Memory (Standard)	128 MB
Print Technology	Laser
Print Speed	Up to 22 ppm
Print Resolution	600 x 600 dpi
Copy Speed	Up to 22 cpm
Operating System Compatibility	Windows, Mac
First Page Out Time (Copy)	8 seconds