Environment Settings
Xerox
®
WorkCentre
®
5022/5024 Multifunction Printer
User Guide
2-32
• IP Filter Rule List
The accessible IPv6 address is displayed.
• Add button
The Add IP Filter Rule - IPv6 screen is displayed. Adds an accessible IPv6 address. You can add up
to 10 IPv6 addresses.
- Source IP Address:
You can set the accessible IP address.
-Source IP Mask:
You can set the prefix length of the accessible IP address (Default: 0)
• Edit button
The Edit IP Filter Rule - IPv6 screen is displayed. Edits the accessible IPv6 address.
- Source IP Address:
You can set the accessible IP address. (Default: 0:0:0:0:0:0:0:0)
-Source IP Mask:
You can set the prefix length of the accessible IP address. (Default: 0)
• Delete button
You can delete the accessible IPv6 address by pressing this button.
Apply button
You can apply changes by pressing this button.
Note Reboot the machine to enable new settings.
System Administrator Settings (Security)
You can set the system administrator's user ID and the passcode.
System Administrator Settings
• Administrator's Login ID
You can enter the system administrator's user ID (between 1 and 32 ASCII code characters in
length, excludes "+", ";", "<", ">", """, "?", "[", "]", "'", "{", "}", "|", ":". (Default: admin)
• Administrator's Passcode
You can set the system administrator's passcode (between 4 and 12 ASCII code characters or
blank). (Default: 1111)
• Retype Administrator's Passcode
You need to re-enter the system administrator’s passcode.
To Next Page
Loading...
Need help?
General
