Xerox WorkCentre 5022 User Manual

Too ls
Xerox
®
WorkCentre
®
5022/5024 Multifunction Printer
User Guide
9-46
24H is set at the time of factory shipment.
1. In the Clock screen, select Time Format, and then press the OK button.
2. Select the time display format, and then press the OK button.
Audio Tones
Used to set the machine's operation and status audio tones.
All Tones
Sets the volume of all the machine's tones. Use this setting to set all the tones to the same volume.
You can select Soft, Normal, or Loud. Select Off to disable this tone.
Off is set at the time of factory shipment.
Selection
Sets the volume of the tone that sounds when selectable buttons are pressed on the control panel.
You can select Soft, Normal, or Loud. Select Off to disable this tone.
Off is set at the time of factory shipment.
Control Panel Alert
Sets the volume of the tone that sounds when non-selectable buttons are pressed on the control panel.
You can select Soft, Normal, or Loud. Select Off to disable this tone.
Off is set at the time of factory shipment.
Machine Ready
Sets the volume of the tone that sounds at power on and at other times to indicate the machine is
ready for copying or printing.
Date Format ... yy/mm/dd
Time Format
... 24H
Clock
Date & Time
...
24H
Time Format
12H

Xerox WorkCentre 5022 Specifications

General

Copy Resolution	Up to 600 x 600 dpi
Scan Resolution	Up to 600 x 600 dpi
Connectivity	USB 2.0
Functions	Print, Copy, Scan
Duplex Printing	Manual
Paper Sizes	A3, A4, A5, B4, B5
Memory (Standard)	128 MB
Print Technology	Laser
Print Speed	Up to 22 ppm
Print Resolution	600 x 600 dpi
Copy Speed	Up to 22 cpm
Operating System Compatibility	Windows, Mac
First Page Out Time (Copy)	8 seconds