Xerox WorkCentre 5022 User Manual

Too ls
Xerox
®
WorkCentre
®
5022/5024 Multifunction Printer
User Guide
9-10
ID Card Copy
Sets the default advanced ID Card Copy settings displayed when the control panel’s ID Card Copy
button is pressed.
Original Size
Sets the default value displayed for Original Size.
You can select values between 86 and 297 mm (in 1 mm increments).
100 mm is set at the time of factory shipment.
Original Type
Sets the default value displayed for Original Type. This setting optimizes the copy characteristics for
the specified document type.
Text is set at the time of factory shipment.
Edge Erase
Sets the default value displayed for Edge Erase. Setting a value for this menu item erases the black
shadows created around the edges of the paper when copying with the document cover open.
You can select values between 0 and 10 mm (in 1 mm increments).
3 mm is set at the time of factory shipment.
Scan
Sets the default advanced scan settings displayed when the control panel's Scan button is pressed.
Color Mode
Sets the default color mode used for scanning (the item displayed for Color Mode).
Black & White is set at the time of factory shipment.
Text Set when copying documents with sharp black and white contrast, such as a text
documents.
Photo & Text Set when copying documents containing both text and photos.
Photo Set when copying photos.

Xerox WorkCentre 5022 Specifications

General

Copy Resolution	Up to 600 x 600 dpi
Scan Resolution	Up to 600 x 600 dpi
Connectivity	USB 2.0
Functions	Print, Copy, Scan
Duplex Printing	Manual
Paper Sizes	A3, A4, A5, B4, B5
Memory (Standard)	128 MB
Print Technology	Laser
Print Speed	Up to 22 ppm
Print Resolution	600 x 600 dpi
Copy Speed	Up to 22 cpm
Operating System Compatibility	Windows, Mac
First Page Out Time (Copy)	8 seconds