Xerox WorkCentre 5022 User Manual

Environment Settings
Xerox
®
WorkCentre
®
5022/5024 Multifunction Printer
User Guide
2-19
• When specifying a port number, add ":" and the port number after the IP address or the Internet
address.
• The IPv6 address cannot be entered manually in some cases depending on the web browser that
you use.
•HTTPS is not supported.
Setting Items on Xerox
®
CentreWare
®
Internet Services
The table below lists the menu items on the Xerox
®
CentreWare
®
Internet Services screens.
Notes
• You must have a user name and a passcode to change the settings. The user ID "admin" and the
passcode "1111" is set as default. For information on how to change the user ID and the passcode,
refer to Using Xerox® CentreWare® Internet Services on page 2-17 and System Administrator
Settings (Security) on page 2-32.
• You cannot enter the system administration mode from a computer while the machine control
panel is in use, the machine side is in the system administration mode, or there are any current or
pending jobs. If you still cannot enter System Administration mode, wait for 5 minutes and try

Xerox WorkCentre 5022 Specifications

General

Copy Resolution	Up to 600 x 600 dpi
Scan Resolution	Up to 600 x 600 dpi
Connectivity	USB 2.0
Functions	Print, Copy, Scan
Duplex Printing	Manual
Paper Sizes	A3, A4, A5, B4, B5
Memory (Standard)	128 MB
Print Technology	Laser
Print Speed	Up to 22 ppm
Print Resolution	600 x 600 dpi
Copy Speed	Up to 22 cpm
Operating System Compatibility	Windows, Mac
First Page Out Time (Copy)	8 seconds