Xerox WorkCentre 5022 User Manual

Too ls
Xerox
®
WorkCentre
®
5022/5024 Multifunction Printer
User Guide
9-2
The passcode input screen appears.
Notes
- The passcode is initially set to "1111" (four "1" digits).
- The passcode can be changed.
For information on how to change the passcode, refer to System Administrator Passcode on
page 9-51.
2. Use the numeric keypad to enter the password, and then press the OK button.
Note The Log In/Out button lights up when the machine enters System Administration mode.
Changing the Settings
1. Press the and buttons to select the item to set.
For more information, refer to List of Tools Menu Items Displayed in System Administration Mode
on page 9-4.
2. Press the OK button.
Note To return to the Tools screen, press the Clear All button. To return to the previous screen,
press the Back or s button.
3. Repeat Steps 1 and 2 as needed to set all the desired functions.
Note Some setting items require input of numerical values using the numeric keypad.
[ ]
System Admin. Passcode
[* * * * * ]
System Admin. Passcode
Device Information ...
Tray Settings ...
Tools
Default Settings
...

Xerox WorkCentre 5022 Specifications

General

Copy Resolution	Up to 600 x 600 dpi
Scan Resolution	Up to 600 x 600 dpi
Connectivity	USB 2.0
Functions	Print, Copy, Scan
Duplex Printing	Manual
Paper Sizes	A3, A4, A5, B4, B5
Memory (Standard)	128 MB
Print Technology	Laser
Print Speed	Up to 22 ppm
Print Resolution	600 x 600 dpi
Copy Speed	Up to 22 cpm
Operating System Compatibility	Windows, Mac
First Page Out Time (Copy)	8 seconds