Xerox WorkCentre 5022 User Manual

Xerox
®
WorkCentre
®
5022/5024 Multifunction Printer
User Guide
2-1
2
Environment Settings
Supported Environment
This section describes the environment settings needed to use the machine's print and scan features.
Print Feature
The machine can be connected directly to a computer for use as a local printer. Connect the machine
to a computer with a USB cable.
Use as a Local Printer
Connect the machine to a computer with a USB cable.
Use as a Network Printer
Print from network-connected computers using the TCP/IP protocol.
To use the machine as a network printer, you need to activate the port to use for printing.
• LPD: Activate this setting when using the LPD port.
• Port9100: Activate this setting when using the Port9100 port.
Note This feature is available when the Network Kit is installed.
For information on how to set TCP/IP, refer to Setting the Network Environment on page 2-6.
For information on how to activate a communication port, refer to Activating the Communication Port
To Use on page 2-11.
Local connection
USB
Network Connection
LPD / Port9100

Xerox WorkCentre 5022 Specifications

General

Copy Resolution	Up to 600 x 600 dpi
Scan Resolution	Up to 600 x 600 dpi
Connectivity	USB 2.0
Functions	Print, Copy, Scan
Duplex Printing	Manual
Paper Sizes	A3, A4, A5, B4, B5
Memory (Standard)	128 MB
Print Technology	Laser
Print Speed	Up to 22 ppm
Print Resolution	600 x 600 dpi
Copy Speed	Up to 22 cpm
Operating System Compatibility	Windows, Mac
First Page Out Time (Copy)	8 seconds