Xerox WorkCentre 5022 User Manual

Problem Solving
Xerox
®
WorkCentre
®
5022/5024 Multifunction Printer
User Guide
13-12
Copying Problems
This section provides possible solutions to various problems you may encounter when using the Copy
features.
Unable to Copy
The table below lists possible solutions when you are unable to copy.
Symptom Possible Cause Remedy
The document is
not fed properly
through the
document
feeder.
The document size is too
small.
The minimum size of document that can be
loaded on the document feeder is A5 .
The document is not a
supported type.
The document feeder does not support
warped documents, business cards,
transparencies, thin documents,
or documents with attached stick-on notes,
paper clips or tape.
Refer to Paper Types on page 4-1.
The document guides are
misaligned.
Align the document guides properly to
match the document size.
There are document shreds
stuck in the document
feeder.
Open the document feeder cover, and
remove the document shreds.
Refer to Document Jams on page 13-55.
You have placed a document
containing pages of different
sizes.
You cannot place documents with different
size pages.

Xerox WorkCentre 5022 Specifications

General

Copy Resolution	Up to 600 x 600 dpi
Scan Resolution	Up to 600 x 600 dpi
Connectivity	USB 2.0
Functions	Print, Copy, Scan
Duplex Printing	Manual
Paper Sizes	A3, A4, A5, B4, B5
Memory (Standard)	128 MB
Print Technology	Laser
Print Speed	Up to 22 ppm
Print Resolution	600 x 600 dpi
Copy Speed	Up to 22 cpm
Operating System Compatibility	Windows, Mac
First Page Out Time (Copy)	8 seconds