Xerox WorkCentre 5022 User Manual

Too ls
Xerox
®
WorkCentre
®
5022/5024 Multifunction Printer
User Guide
9-36
Redial Interval
Sets the amount of time the machine waits between redials.
You can set a value between 1 and 15 minutes (in 1 minute increments).
The time is set to 5 minutes at the time of factory shipment.
Junk Filter
Used to set whether to block junk faxes from being received or not.
You can select On or Off.
Off is set at the time of factory shipment.
Send Header
Sets whether to record and send fax header information (such as date, sender, and recipient) at the
beginning of faxes.
You can select On or Off.
On is set at the time of factory shipment.
Company Name
Used to register the sender's name to be sent to the recipient when a fax is sent.
You can enter up to 32 single-byte alphanumeric characters.
Fax Number
Used to register the machine's fax number to be sent to the recipient when a fax is sent.
You can enter up to 20 digits, including numbers (0 to 9).
Forward
Sets whether or not to forward a fax document received on this machine to another fax number.

Xerox WorkCentre 5022 Specifications

General

Copy Resolution	Up to 600 x 600 dpi
Scan Resolution	Up to 600 x 600 dpi
Connectivity	USB 2.0
Functions	Print, Copy, Scan
Duplex Printing	Manual
Paper Sizes	A3, A4, A5, B4, B5
Memory (Standard)	128 MB
Print Technology	Laser
Print Speed	Up to 22 ppm
Print Resolution	600 x 600 dpi
Copy Speed	Up to 22 cpm
Operating System Compatibility	Windows, Mac
First Page Out Time (Copy)	8 seconds