Too ls
Xerox
®
WorkCentre
®
5022/5024 Multifunction Printer
User Guide
9-12
Original Type
Sets the default value displayed for Original Type. This setting optimizes the scanning characteristics
for the specified document type.
Text is set at the time of factory shipment.
When Color Mode is set to Color, the image quality of Text and Photo are equivalent to that of Photo
& Text.
Lighten/Darken
Sets the default scan density value displayed for Lighten/Darken.
You can select Darken +2, Darken +1, Normal, Lighten +1, or Lighten +2.
Normal sets the scan density at about the same as the document; Darken +2 sets a higher density
than the document; Lighten +2 sets a lower density.
Normal is set at the time of factory shipment.
Fax
Sets the default advanced fax settings displayed when the control panel's Fax button is pressed.
This menu item is not displayed when the Fax Kit is not mounted. When the Region item has not been
set in the Fax Settings, some items are not displayed. Set the Region item beforehand.
Resolution
Sets the default fax scan resolution displayed for Resolution.
Standard is set at the time of factory shipment.
Text Set when scanning documents with sharp black and white contrast, such as a text
documents.
Photo & Text Set when scanning documents containing both text and photos.
Photo Set when scanning photos.
Note: This item is disabled when Color Mode is set to Black & White and enabled
when Color Mode is set to Color.
Standard Scans faxes at the resolution of 200 x 100 dpi (7.9 x 3.9 dots/mm).
Fine Scans faxes at the resolution of 200 x 200 dpi (7.9 x 7.9 dots/mm).
Superfine Scans faxes at the resolution of 400 x 400 dpi (15.7 x 15.7 dots/mm).
To Next Page
Loading...
Need help?
General
