Xerox WorkCentre 5022 User Manual

Maintenance
Xerox
®
WorkCentre
®
5022/5024 Multifunction Printer
User Guide
12-14
To ensure clean copies at all times, clean the document presser and narrow glass strip about once a
month.
CAUTIONS:
• Do not use benzene, paint thinner, or other organic solvents. Doing so might damage the paint or
coating on plastic parts.
• Cleaning the machine with an excessive amount of water may cause the machine to malfunction
or damage documents during copying or scanning.
1. Wipe the document presser with a soft cloth moistened with water to remove any dirt, and then
wipe it with a soft, dry cloth.
Notes
• Do not press the film with excessive force as it can be easily damaged.
• Do not use cleaning agents other than water or neutral detergent.
• If you cannot remove dirt easily, gently wipe the document presser with a soft cloth moistened
with a small amount of neutral detergent.
2. Wipe the narrow glass strip with a soft cloth moistened with water to remove any dirt, and then
wipe it with a soft dry cloth.
Notes
• Do not use cleaning agents other than water or neutral detergent.
• If you cannot remove dirt easily, gently wipe the narrow glass strip with a soft cloth moistened
with a small amount of neutral detergent.

Xerox WorkCentre 5022 Specifications

General

Copy Resolution	Up to 600 x 600 dpi
Scan Resolution	Up to 600 x 600 dpi
Connectivity	USB 2.0
Functions	Print, Copy, Scan
Duplex Printing	Manual
Paper Sizes	A3, A4, A5, B4, B5
Memory (Standard)	128 MB
Print Technology	Laser
Print Speed	Up to 22 ppm
Print Resolution	600 x 600 dpi
Copy Speed	Up to 22 cpm
Operating System Compatibility	Windows, Mac
First Page Out Time (Copy)	8 seconds