Xerox WorkCentre 5022 User Manual

Problem Solving
Xerox
®
WorkCentre
®
5022/5024 Multifunction Printer
User Guide
13-24
The image is not
the desired size.
The document cover or
document glass is dirty.
Clean the document cover or document
glass.
Refer to Cleaning the Document Cover and
the Document Glass on page 12-12.
The document is a
transparency or highly
translucent medium.
Place a sheet of white paper over the
document before scanning.
The document has shifted
out of position.
Place the document correctly.
Refer to Placing the Document on page 5-1.
The document feeder's
document guides are
misaligned.
Place the document correctly, moving the
document guides into contact with the
edges of the document.
Refer to Placing the Document on page 5-1.
The document is creased. Smooth out the document and place it again
correctly.
The image is
grainy.
A low resolution is set. Set a higher resolution.
Refer to Placing the Document on page 5-1.
Symptom Possible cause Remedy

Xerox WorkCentre 5022 Specifications

General

Copy Resolution	Up to 600 x 600 dpi
Scan Resolution	Up to 600 x 600 dpi
Connectivity	USB 2.0
Functions	Print, Copy, Scan
Duplex Printing	Manual
Paper Sizes	A3, A4, A5, B4, B5
Memory (Standard)	128 MB
Print Technology	Laser
Print Speed	Up to 22 ppm
Print Resolution	600 x 600 dpi
Copy Speed	Up to 22 cpm
Operating System Compatibility	Windows, Mac
First Page Out Time (Copy)	8 seconds