XPENG G9 - Turning Lamps; Lane Change Flashing Light

7XUQLQJ/DPSV
After turning on the turning lamps, the
corresponding indicator on the ICM flashes and
a “FOLFNLQJ” sound is heard.
– Move the combination switch down to turn on
the left turning lamp, and the indicator on
the ICM will flash.
– Move the combination switch up, turn on the
right turning lamp, and the indicator on the
ICM will flash.
– Gently move the combination switch to the
left/right lane change switch position or
return the steering wheel to turn off the
turning lamps.
/DQH&KDQJH)ODVKLQJ/LJKW
To indicate lane change, gently move the
combination switch up or down to the resistance
point and release it. The combination switch
will immediately return, and the corresponding
turning lamp will flash for 3 times.
3URSHU'ULYLQJ
220
9
https://www.automotive-manuals.net