preheating is completed. Parking for a long
time will reduce the heating effect.
• If the temperature of the traction battery
is high, the low-temperature battery
preheating function will not be activated.
• If a slow charging appointment is used at
the same time, please make sure to set
the preheating time later than the charging
appointment.
• This function will slightly increase the power
consumption of the charging pile, please
use it as needed.
• If the activation fails, please check whether
the activation conditions of the function are
met. If there is an abnormal situation, please
contact the XPENG Service Center.
7LSV
• When charging at low ambient temperatures,
the system will prioritize heating the traction
battery and then charge it normally after the
traction battery temperature is normal, so
the charging time will be slightly longer than
normal.
• When the indication information shows that
the charging is abnormal, you can try to
re-operate the charging steps, restart the
whole vehicle, and switch to other charging
piles. Do not repeatedly plug and unplug the
charger and manipulate the charging pile
operation interface. If you still cannot charge
normally, please contact XPENG Service
Center for inspection and repair.
• It is recommended not to turn on the air
conditioning system during AC charging.
'&&KDUJLQJ
Charging with DC provides fast charging time.
Charging operation:
1. Open the charging port.
2. Insert the charger vertically into the DC
charging port.
3. Observe the charging indication information.
(OHFWULF6\VWHP
32
2
https://www.automotive-manuals.net
To Next Page
Loading...
Need help?
General
