6OLGLQJ(QHUJ\5HFRYHU\
The gas pedal and brake pedal should be in a
released status when the vehicle applies energy
recovery during sliding.
%UDNLQJ(QHUJ\5HFRYHU\
The driver presses the brake pedal to apply
brake energy recovery.
)DFWRUVAffHFWLQJ(QHUJ\5HFRYHU\
The electric quantity supplied through energy
recovery to the traction battery is determined by
the following factors:
1. The electric quantity and temperature of the
traction battery.
2. Energy recovery level:
– Tap “
→'ULYH0RGH” in turn to choose the
energy recovery level.
7LSV
If the energy recovery brake application
significantly decelerates the vehicle speed
(e.g. moving on a steep slope), the brake
light will be turned on to remind the following
drivers that you are decelerating.
FDXWLRQ
The brake application deceleration through
energy recovery can not replace the
brake application required to ensure safety.
Therefore, the driver should timely apply brake
to the vehicle according to the practical
situation.
(OHFWULF6\VWHP
38
2
https://www.automotive-manuals.net
To Next Page
Loading...
