XPENG G9 User Manual

• When the indication information shows that
the charging is abnormal, you can try to
re-operate the charging steps, restart the
whole vehicle, and switch to other charging
piles. Do not repeatedly plug and unplug the
charger and manipulate the charging pile
operation interface. If you still cannot charge
normally, please contact XPENG Service
Center for inspection and repair.
• Priority allocation of air conditioning system
power to battery heating during AC charging
may result in no air conditioning cooling/
heating.
• Due to differences in the understanding
of charging standards by charging pile
manufacturers of various brands, and
the different levels of maintenance of
charging pile products, there may be cases
where individual charging piles cannot be
successfully charged. If you encounter this
phenomenon, please try to reinsert the
charger or switch to other charging piles for
charging.
&KDUJLQJ3UHFDXWLRQV
• When taking the charger out of the charging
pile, please hold the charger firmly with both
hands to prevent the twisted charging cable
from bouncing back and hitting the operator,
causing injury.
• Before charging, please check whether the
charging port, charger, charging plug and
other equipment are dry. It is forbidden to
charge when the charging equipment or hands
are wet.
• During the charging, the charging cable must
be straightened and not twisted.
• If the charging equipment is corroded or
damaged, such as the metal terminal of
the charging gun is deformed or skewed,
the plastic body of the plug is deformed
or ruptured and other abnormal conditions,
charging is prohibited.
• In case of emergency during charging, press
the emergency stop button on the charging
device to stop charging.
(OHFWULF6\VWHP
35
2
https://www.automotive-manuals.net

XPENG G9 Specifications

General

Brand	XPENG
Model	G9
Category	Automobile
Language	English