1. Tap the CID status bar to enter the Energy
Center interface.
2. Tap the Charging Appointment switch button
to enter the Charging Appointment interface.
3. Set the charging appointment time.
4. Open the charging port.
5. Remove the charger on the AC charging pile
and insert it vertically into the AC charging
port to enter the charging appointment.
7LSV
• Charging time is extended by ambient
temperature, traction battery life and other
factors.
• In some special operation status (such as
not pulling out the charger after charging
for a long time), in order to save the power,
the automatic cover closing function will
be temporarily closed when the charger is
pulled out, please pay attention to close
the cover of the charging port in time, to
avoid the entry of rain, snow or other foreign
objects.
• When charging at low ambient temperatures,
the system will prioritize heating the traction
battery and then charge it normally after the
traction battery temperature is normal, so
the charging time will be slightly longer than
normal.
(OHFWULF6\VWHP
34
2
https://www.automotive-manuals.net
To Next Page
Loading...
Need help?
General
