XPENG G9 - Operation of Functions; Limitation and Error; Collision Avoidance Assist - Starting; Function Introduction

2SHUDWLRQRI)XQFWLRQV
Tap “→;3,/27” in turn on CID to enable or
disable the rear cross traffic alert.
/LPLWDWLRQDQG(UURU
RCTA may not always work in all situations, and
there are various reasons that could lead to
unnecessary, delayed, or ineffective warnings or
even missed warnings, such as:
• The radar is restricted. See 18 page
• The presence of large moving metal objects in
the blind-spot area.
• The detection object's speed is too fast.
The above examples, warnings, and limitations do
not cover all the potential factors that may affect
the normal operation of RCTA.
&ROOLVLRQ$YRLGDQFH$VVLVW6WDUWLQJ
)XQFWLRQ,QWURGXFWLRQ
The starting obstacle avoidance assist function
is an active safety function. When the vehicle
starts at low speed, it identifies nearby obstacles
in the direction of travel and intelligently limits
the vehicle's maximum acceleration capability.
This helps reduce the risk of crash accidents
caused by the driver accidentally stepping on
the accelerator pedal.
6ZLWFK
Tap “→;3,/27” in turn on CID, and in the
current interface, you can enable or disable the
starting obstacle avoidance assist.
$FWLYH6DIHW\
80
4
https://www.automotive-manuals.net