Tap “ →;3,/27” in turn on the CID to select
the assistive mode for the intelligent speed limit
assist.
Disabled: For turning off ASL only, the speed limit
alarm and TSR are still turned on.
Manual: When the TSR recognizes new speed
limit information, there will be an alarm on the
ICM. Move down the gearshift lever to set the
cruise vehicle speed to the speed limit on the
road.
Automatic: When the TSR recognizes new speed
limit information, the ASL will automatically set
the cruise vehicle speed to the speed limit on
the road.
6HUYLFH5HVWULFWLRQV
SAS may not be able to fully perform its function
or may provide inaccurate information in the
situations below:
• The camera is subject to the limit. See 20
page
• There is a recent change on the road or
the speed limit, for example, construction,
restriction, and others.
• Traffic signs are in bad condition: damaged,
faded, vague, or not placed or set according
to requirements.
The above example, warning, and limit do not
describe all conditions that affect the normal
operation of the SAS.
/DQH&HQWHULQJ&RQWURO/&&
)XQFWLRQ,QWURGXFWLRQ
LCC is an assistive driving function for comfort,
which can assist the driver in controlling the
$VVLVWHG'ULYLQJ
53
3
https://www.automotive-manuals.net
To Next Page
Loading...
Need help?
General
