XPENG G9 - Clean the Charging Port House; Tire Care and Maintenance; Check and Maintenance of Tires; Tire Wear

&OHDQWKH&KDUJLQJ3RUW+RXVH
For normal use, clean with a high-pressure air
gun or brush every week. If it is impossible,
use a dust-free cloth or cotton swab to clean
the charging port house and charger. In case
of unexpected situation (such as the charging
port cover is not closed), clean with the above
methods timely.
ZDUQLQJ
Do not use screwdrivers, tweezers and other
sharp objects to touch the charger pin and
charging port house, to avoid damaging the
pin and socket.
7LUH&DUHDQG0DLQWHQDQFH
&KHFNDQG0DLQWHQDQFHRI7LUHV
Regularly check the tread for abnormal wear,
nails, etc. Regularly check the tire wall for bulges,
cuts, etc.
7LUH:HDU
Sufficient tread depth is crucial for the tire
performance. Tires with a tread depth less than
2 mm are easily slipping under slippery road
conditions and it is not suitable to use. Tires
with a tread depth less than 4mm will have poor
performance on snowy and muddy roads, and it
is not suitable to use when driving in winter.
In order to reduce tire wear and increase the tire
life cycle, the tires can be maintained according
to your driving habits and road conditions:
• Avoid rapid departure or coarse acceleration.
• Avoid sharp turns and heavy braking.
• Drive slowly when driving on potholes, curbs,
or similar roads.
• It is recommended to rotate the tires every
10,000 kilometers.
5HSODFH7LUHVDQG:KHHOV
Tires will age over time due to ultraviolet
radiation, extreme temperatures, high loads and
0DLQWHQDQFH
245
10
https://www.automotive-manuals.net