Add high-quality neutral detergent into cold
or warm water, wet a soft cloth, and wash the
exterior of vehicle by hand.
4. Rinse with clean water
After cleaning, rinse thoroughly with clean
water to prevent residual soap on the surface
from drying.
5. Wipe dry with a soft cloth
3UHFDXWLRQVIRU([WHUQDO&OHDQLQJ
FDXWLRQ
• Do not use hot water and detergents.
• In hot weather, do not rinse in direct
sunlight.
• If using a high-pressure washer, keep the
nozzle at least 30 cm away from the surface
of the body, keep the nozzle moving, and
do not continuously spray water towards a
certain area. Do not spray water towards the
charging port.
• When washing vehicle in a low temperature
environment, or when parking outdoors in
snowy days, the active grille blades may
not work normally due to icing. It is normal
that the ICM prompts the active grille fault,
which will not affect the normal driving of
the vehicle. After normal driving for a period
(about 1 hour) or defrosting with a heat gun,
the fault disappears automatically. If the fault
still exists after the blades are defrosted,
please contact XPENG Service Center for
inspection and repair.
• Do not spray water directly towards the
window or door sealing strip, or through the
hub hole into the brake parts.
• Avoid using cotton velvet or coarse cloth,
such as cleaning gloves.
• Do not use chemical tire cleaning agents, as
this may damage the surface of the finished
wheel.
0DLQWHQDQFH
250
10
https://www.automotive-manuals.net
To Next Page
Loading...
Need help?
General
