XPENG G9 - Page 226

11HXWUDO
The vehicle can be shift into N gear with the
following operations, and the Gear N of the ICM
is on:
– When the vehicle is at D gear, push the gear
lever up 1 level for 1 sec.
– When the vehicle is at R gear, push the gear
lever down 1 level for 1 sec.
– When the vehicle is at P gear, press the brake
pedal and push the gear lever up or down 1
level for 1 sec.
''ULYH
Press the brake pedal when the vehicle is
stationary and simultaneously push the gear
lever up 2 gears. The Gear D of the ICM is on
and the vehicle is shift into D gear.
33DUN
Press the brake pedal when the vehicle is
stationary and simultaneously press the P gear
button on the shift lever. The Gear P of the ICM
is on and the vehicle is shift into P gear.
• When the charger is connected for charging,
the vehicle will automatically switch to P gear.
• After opening the driver's door, the vehicle
will automatically switch to P gear when the
vehicle is at D or R gear at speed less than
3km/h without wearing seat belt and without
pressing the brake and accelerator pedals.
FDXWLRQ
• Shifting requires certain conditions. If it
cannot meet the conditions, the instrument
panel will display “&KDUJHUFRQQHFWHG
XQDEOHWRVKLIW”, “3OHDVHVKLIWDIWHUDSSO\LQJ
WKHEUDNH”, “3OHDVHVKLIWDIWHUVORZLQJ
GRZQ” when shifting. Follow the prompts to
operate to meet the shifting conditions.
• If it is unable to shift the gear
normally, contact XPENG Service Center for
inspection and repair.
3URSHU'ULYLQJ
225
9
https://www.automotive-manuals.net