)LOOLQ%UDNH)OXLG
1. Wrap a flat head screwdriver in a cloth, open
an
d remove the upper trim panel of the
reservoir at the position indicated by the
arrow in the figure.
2. Clean the reservoir cap first to prevent dust
from entering.
3. Unscrew and remove the reservoir cap.
4. Fill the brake fluid approved by XPENG Inc.
until the brake fluid is close to the MAX mark.
ZDUQLQJ
• Please use new brake fluid in airtight sealed
bottle. Do not apply the used brake fluid
0DLQWHQDQFH
238
10
https://www.automotive-manuals.net
To Next Page
Loading...
