3. Take out the inflation tube and the electrical
cord from both sides of the inflatable pump.
4. Attach the inflation tube to the tire valve and
tighten it.
5. Insert the electrical source plug of the
inflatable pump into the 12V power source in
the vehicle.
6. Turn on the power switch of the inflatable
pump and start injecting sealant into the tire.
• Observe the pressure gauge until the tire
pressure reaches the standard value, then
turn off the power switch.
• Reference to the Tire Pressure Label for
the standard tire pressure value for the tire
specification.
(PHUJHQF\$LG
286
12
https://www.automotive-manuals.net
To Next Page
Loading...
