manufacturer marks or numbers are visible.
When installing oil seals, lubricate t
he
oil seal
lips with a light coat of lithium-soap-based
grease. O
il
bearings liberally when installing, if
appropriate.
NOTICE
~~~~~~~~~~~~~
Do
not spin the bearing with compressed air
because
this will
damage
the bearing surfac-
es.
1
Cl RC LIPS
Before reassembly, check a
ll
ci
rclips carefully
and replace damaged or disto
rt
ed circlips. Al-
ways replace piston pin clips after one use.
When installing a circlip
"1",
make
su
re
the
sharp
-e
dged corner "2" is positioned opposite
the thrust "3" that the ci
rc
li
p receives.
1
3
c)
RUBBER
PARTS
Check rubber parts for deterioration du
rin
g in-
spection. Some of the rubber parts are sensitive
to gasoline,
fl
ammable oil, grease, etc.
Do
not al-
IMPORTANT INFORMATION
low any items other than the specified one to
contact the pa
rts.
1-12
To Next Page
