Yamaha FZ09E - Installing the Balancer Assembly

CRANKSHAFT AND BALANCER SHAFT
nal be a ri ngs "1" wit h the notches "b" in the
crankcase.
• Be sure to install each cr ankshaft journal bear-
ings
in its original place.
, . .,.,.,
INSTALLING THE BALANCER ASSEMBLY
1 . Install:
• Balanc er journal upper bearings
(into the upper cr ankcase)
• Balanc er journal lower bearings
(into the lower cr ankcase)
TIP ---------------
• Al ig n the projections "a" on the balancer jo urnal
bearings "1" with t he notches "b" in the crank-
cases.
• Be sure to install each balancer journal bearing
in its or iginal place.
2. Install:
•
Ba lancer shaft
TIP ---------------
lnstall by aligning the crankshaft mat ch mark "a"
and t
he balancer shaft match mark "b".
5-75