Yamaha FZ09E - Page 251

GENERATOR AND STARTER CLUTCH
3. Apply:
• Sealant
(onto the stator coil assembly lead gro
mm e t)
4. Install:
Yamaha
bo nd No.1215
(Three
bond No.1215®)
90890-85505
• Generator cover gasket
l~Mi
• Ge nerator co ve r
Generator
cove r bolt "1"
12 Nm
(1 .2 m· k,gf , 8.7 ft·lbf)
LOCTITE®
Generator
co ver bolt "2"
12 Nm
(1 .2 m· k,gf , 8.7 ft·lbf)
T IP ~~~~~~~~~~~~~~
Tighten th e generat or cover bolts in stages and
in a c
ri sscross patte rn .
5. Connect:
• Stat
or co il coupler
• Crankshaft position sensor coupler
T I P ~~~~~~~~~~~~~~-
To ro ute the stat or coil lead, refer to "C ABLE
ROUTING" on page 2-41.
5-34