1.
Air
filter case joint c
la
mp
2. ECU (engine control unit)
3.
Air
filter case
4.
Throttle body
5. Clip
6.
Cy
lin
de
r head breather h
ose
7.
Throttle cable (decelerator cable) (white plating)
8. Throttle cable (accelerator cable) (black plating)
9.
Injector lead
1 O. Injector coupler
11
. F
ue
l rail
12. F
ue
l
ho
se (black s
id
e)
13
. Canister purge hose (for
Ca
lifornia
on
ly)
A. Install
th
e breather hose on the yell
ow
paint mark
side to the air filter case, with
its
ye
llow
pa
int mark
facing toward left side of t
he
vehicle.
Point the end of t
he
clip toward left.
B. Install the b
re
ather hose so that the tip touches the
pipe of the cylinder head.
Install
the
breather hose on the white paint mark
side to t
he
engi
ne
.
I
ns
tall
the
breather hose so that t
he
white
pa
int
ma
rk is in the rear of the vehicle and parallel
to
t
he
cy
linder
he
ad mating surfaces.
Install
th
e clip so that t
he
end is in the rear of t
he
vehicle and parallel
to
the cylinder head mating
surfaces.
C.
I
ns
tall the ECU harness
by
storing it in the recess
in t
he
air filter case.
D. I
ns
tall the ECU so th
at
the hooks on the air filter
case
go
over the ECU edges.
E. Store the throttle cables on t
he
protrusion
of
th
e
air
fi
lter case.
F. Inse
rt
th
e injector coupler all the way in.
G. I
ns
tr
uc
tive drawing for assembling the throttle
cables
H.
Install
th
e throttle cable so t
hat
the nut of the throt-
tle cable touches the stay.
CABLE ROUTING
2-52
To Next Page
Loading...
