YASKAWA MP3000 Series - Saving to Flash Memory

4.5 Transferring Data with the MPE720
4.5.5 Saving to Flash Memory
4-69
4
Creating User Programs
3. Click the Batch Button or the Individual Button, and then the Start Button.
If you click the Batch Button, use the check boxes to indicate the data to transfer: System Configura-
tion, Program, Register, and/or Comment.
If you click the Individual Button, use the check boxes to indicate the data to transfer: System Config-
uration, Program, Register, and/or Comment. You can then specify the individual data to transfer.
4.5.5 Saving to Flash Memory
You can save the Machine Controller RAM data to the flash memory of the Machine Controller.
Use the following procedure to save the data.
1. Select Online - Save to Flash from the menu bar.
The Transfer Program - Save to Flash Dialog Box will be displayed.
2. Click the Start Button.
If the CPU Unit/CPU Module is running, the following message will be displayed. Click either the Yes
or the No Button to save the data to the flash memory.
You can save the data to flash memory only when the Machine Controller is connected (online).
Important