YASKAWA MP3000 Series - Register List Panes; Watch Panes; Searching and Replacing in Programs

5.2 Debugging a Motion or a Sequence Program
5.2.3 Register List Panes
5-26
Alarm Indications
If an alarm occurs in the motion program during execution, the line that is being executed will
be displayed in red.
5.2.3 Register List Panes
You can display a register list in the same way as you can when you debug a ladder program.
Refer to the following section for details.
5.1 Debugging Ladder Programs − Register List Panes (page 5-4)
5.2.4 Watch Panes
You can monitor the values and comments of the specified S, I, O, M, C, D, and G registers in
the Watch 1, 2, and 3 Panes. Refer to the following section for details.
5.1 Debugging Ladder Programs − Watch Panes (page 5-7)
5.2.5 Searching and Replacing in Programs
You can search and replace text in the same way as you can for ladder programs.
Refer to the following section for details.
5.1 Debugging Ladder Programs − Searching and Replacing in Programs (page 5-9)