YASKAWA MP3000 Series - Setting Online Security

6.3 Online Security
6.3.1 Setting Online Security
6-11
6
Security
6.3.1 Setting Online Security
This section describes how to set restrictions on reading the data from the Machine Controller.
Use the following procedure to set online security.
1. With the Machine Controller online, select Online − Security Setting from the menu bar.
The Security Setting Dialog Box will be displayed.
2. Select the Apply File Reading Restriction Check Box, and then select the value of the
Restriction Privilege Box from the list.
3. Enter the password in the Security Key Box. Enter the same password again in the
Security Key Confirmation Box, and then click the Set Button.
The Set Button will be enabled when one or more characters of text are entered in the Security Key
Box.
The file reading restriction and the security key will be changed, and the following message will be
displayed to ask for confirmation.
4. Click the OK Button.
Click the Close Button to close the Security Setting Dialog Box.
Save to flash memory, if necessary.