YASKAWA MP3000 Series - Project File Security; Setting a Project Password; Creating or Changing a Password

To Next Page

To Previous Page

6.1 Project File Security

6.1.1 Setting a Project Password

6-2

6.1

Project File Security

This section describes the security features for project files.

6.1.1

Setting a Project Password

You can set a password for the project file that is currently open.

6.1.2

Creating or Changing a Password

Select Security and then Project Password from the tree structure in the Environment

Setting Dialog Box. The following view will be displayed.

Select the When the project is opened, the password is input Check Box on the Proj-

ect Password View. The following dialog box will be displayed. Enter each item, and

then click the OK Button.

If you forget the password that you set, there is no way to recover it and it will be impossible to

open the password-protected project file.

Important

Item Description

Password

Enter from 1 to 16 alphanumeric characters. The password is not case sensi-

tive.

Password (confirm)

Enter the same password one more time, and then click the OK Button.

Note: The OK Button will be enabled when one or more characters are

entered in the Password (confirm) Box.

Other manuals for YASKAWA MP3000 Series