6.3 Online Security
6.3.5 Unlocking Online Security Temporarily
6-15
6.3.5
Unlocking Online Security Temporarily
This section describes how to temporarily unlock the online security settings.
Use the following procedure to temporarily unlock the security that was set for the Machine
Controller.
1.
With the Machine Controller online, select Online − Security Setting from the menu bar.
The Security Setting Dialog Box will be displayed.
2.
Enter the current security key in the Security Key Box, and then click the Unlock But-
ton.
The following confirmation message will be displayed.
3.
Click the OK Button.
Click the Close Button to close the Security Setting Dialog Box.
Even if you save the settings to the flash memory, the temporary unlocked status will not be saved,
and the online security setting will be maintained.
To Next Page
Loading...
