YASKAWA MP3000 Series - Using the Mploader Ver.4

4.6 Data Transfer without Using the MPE720
4.6.2 Using the MPLoader Ver.4
4-74
4.6.2 Using the MPLoader Ver.4
The MPLoader Ver.4 software was developed to provide an easy way for users to modify the
internal definition files, application programs, and register data in an MP3000-series Machine
Controller without using the MPE720. The following table lists the various models of this prod-
uct.
The model depends on the number of PCs that the software can be installed on.
Function
 Loading Application Data
• The folder containing all of the data for one Machine Controller in the MPE720 can be loaded
into the Machine Controller in a batch operation.
• You can make setting when creating the data that is loaded into the Machine Controller to
also back up the application that is already loaded into the Machine Controller.
 Saving to Flash Memory
The MPL700 Client can save data to flash memory.
System Requirements
The following table gives the system requirements.
Applicable Models and Communications Interfaces
The following models and communications interfaces can be used with the MPL700 Client:
• Model: MP3000-series Machine Controller
• Communications: Serial (RS-232C) or Ethernet (except relay and duplex)
Name Model Description
MPL700 Client
CPMC-MPL700C Single license
CPMC-MPL700C-10 10 licenses
CPMC-MPL700C-20 20 licenses
Item Specification
CPU Pentium II, 400 MHz min.
RAM 128 MB min.
HD
Space is required for software installation.
MPL700C software installation: 30 MB
Display resolution 800 × 600 min.
OS Windows 2000, Windows XP, Windows Vista, Windows 7