YASKAWA MP3000 Series - Creating a Sequence Subprogram

4.4 Creating a Sequence Program
4.4.2 Creating a Sequence Subprogram
4-63
4
Creating User Programs
5. Select Compile - Compile from the menu bar to compile the program.
When the compilation is finished, the motion program will be saved automatically.
4.4.2 Creating a Sequence Subprogram
Use the following procedure to create a sequence subprogram.
1. Start the Motion Editor.
2. Expand the tree structure in the Motion Pane. Right-click Sub program, and select
New.
3. Click the OK Button.
If an error occurs during compilation, the motion program will not be saved.
Important