YASKAWA MP3000 Series - Page 210

4.6 Data Transfer without Using the MPE720
4.6.3 Using the MPLoad Maker
4-77
4
Creating User Programs
MPLoad Maker Product Specifications
The following table lists the product specifications of the MPLoad Maker.
*1. Relay settings are not supported.
*2. More space may be required depending on the size of the transferred application.
Refer to the following manual for details on the features and operation of the MPLoad Maker.
MP2000/MP3000-series MPLoad Maker Version4 User’s Manual Auto Transfer File Creation Tool
(Manual No.: SIEP C880761 02)
Item Development PC (MPLoad Maker) Target P C
Applicable Machine Control-
lers
MP2100, MP2100M, MP2101, MP2101M, MP2101T, MP2101TM,
MP2200 (CPU-01/02/03/04), MP2300, MP2310, MP2300S, MP2400, MPU-
01, MP3200, MP3300
CPU Pentium II, 400 MHz min.
RAM 128 MB min. −
Display resolution 800 × 600 min. −
Applicable OS
Windows 2000 (English or Japanese),
Windows XP (English or Japanese),
Windows Vista (English or Japanese), or
Windows 7 (32-bit or 64-bit edition, English or Japanese)
Applicable communication
interfaces and correspond-
ing Communications Mod-
ules
−
ETHERNET
218IF-01
*1
218IFA
*1
218IFB
*1
218IFC
*1
218IFD
*1
Serial (RS-232C)
217IF-01
*1
218IF-01
*1
260IF-01
261IF-01
215AIF-01
USB
MP2200(CPU-02)
PCI Bus
MP2100
MP2100M
MP2101
MP2101M
MP2101T
MP2101TM
Transferable files
YMW/YMW7 file (project file that was created with MPE720 Version 6 or Ver-
sion 7)
Consecutive application
transfers
− Supported.
Installation size 30MB Installation is not required.
Available HDD space for exe-
cution
25 MB
*2
(for one Auto_MPL)
1MB
*2
(released when the transfer is
completed)