YASKAWA MP3000 Series - Page 225

5.1 Debugging Ladder Programs
5.1.6 Cross Reference Panes
5-15
5
Debugging Programs
Check box Search Method
Selected.
A search is made for registers that are the same as the register that was found.
Select this check box to display the results in a list when you search the following
instructions for a variable of MW00000.
Not
selected.
A search is not made for the same register and data type as the register that was
found.
Clear the selection of this check box to not display the results in a list when you
search the following instructions for a variable of MW00000.
Check box Search Method
Selected.
Searches for redundant addresses.
Select this check box to display the results in a list when you search the following
instructions with a variable with a different data type, such as ML00000.
Not
selected.
A search is not performed for redundant addresses.
Clear the selection of this check box to not display the results in a list when you
search the following instructions for a variable with a different data type, such as
ML00000.