5.3 Monitoring Machine Operation
5.3.3 Realtime Tracing
5-51
Starting and Stopping Traces
Read Again
Function Description
Start Trace
Use this button to start the trace. The data that is sampled will be displayed in real-
time.
If the Program Option was selected in the Sampling & Trigger Setting Dialog Box, the
trace cannot be started manually. You can use only the Read Again Button.
Real Time Display
Select the Real Time Display Check Box to display the trace data moving in realtime.
If more than one Trace Tab Page is open, you can use a realtime display for only one of
them.
Stop Trace
Use this button to stop the trace. When you press the Stop Button, all trace buffer
data will be collected and displayed.
The Read Again Button re-reads the trace data from the Machine Controller.
To Next Page
Loading...
