YASKAWA SGD7S - Page 600

14.2 Parameter Recording Table
14-36
Pn163 0
Anti-Resonance Damping
Gain
Immediately
Pn164 0
Anti-Resonance Filter Time
Constant 1 Correction
Immediately
Pn165 0
Anti-Resonance Filter Time
Constant 2 Correction
Immediately
Pn166 0
Anti-Resonance Damping
Gain 2
Immediately
Pn170 1401
Tuning-less Function-
Related Selections
*
Pn181 0
Mode Switching Level for
Speed Reference
Immediately
Pn182 0
Mode Switching Level for
Acceleration
Immediately
Pn200 0000
Position Control Reference
Form Selections
After restart
Pn205 65535 Multiturn Limit After restart
Pn207 0000
Position Control Function
Selections
After restart
Pn20A 32768
Number of External
Encoder Scale Pitches
After restart
Pn20E 64
Electronic Gear Ratio
(Numerator)
After restart
Pn210 1
Electronic Gear Ratio
(Denominator)
After restart
Pn212 2048
Number of Encoder Output
Pulses
After restart
Pn216 0
Position Reference Acceler-
ation/Deceleration Time
Constant
Immediately
after the
motor stops
Pn217 0
Average Position Refer-
ence Movement Time
Immediately
after the
motor stops
Pn218 1
Reference Pulse Input Mul-
tiplier
Immediately
Pn22A 0000
Fully-closed Control Selec-
tions
After restart
Pn281 20 Encoder Output Resolution After restart
Pn282 0 Linear Encoder Scale Pitch After restart
Pn300 600
Speed Reference Input
Gain
Immediately
Pn301 100 Internal Set Speed 1 Immediately
Pn302 200 Internal Set Speed 2 Immediately
Pn303 300 Internal Set Speed 3 Immediately
Pn304 500 Jogging Speed Immediately
Pn305 0
Soft Start Acceleration
Time
Immediately
Pn306 0
Soft Start Deceleration
Time
Immediately
Pn307 40
Speed Reference Filter
Time Constant
Immediately
Pn308 0
Speed Feedback Filter
Time Constant
Immediately
Pn30A 0
Deceleration Time for Servo
OFF and Forced Stops
Immediately
Continued on next page.
Continued from previous page.
Parameter
No.
Default Setting Name
When
Enabled